Gw carbide-tungsten carbide drawing die blank and complete die.

Carbide cold forging dies/Tungsten Carbide Heating DiesOur advantage1 100% raw material, HIP-Sintered2 No porosity, no crack3 Good wear resistance, long working life4 High bending strength, good impact resistance5 Finish grinding, concentricity of O.D and I.D6 Good corrosion resistance7 Big production capacity, delivery time wit

Featured Products

Carbide cold forging dies/Tungsten Carbide Heating Dies

Our advantage

1 100% raw material, HIP-Sintered
2 No porosity, no crack
3 Good wear resistance, long working life
4 High bending strength, good impact resistance
5 Finish grinding, concentricity of O.D and I.D
6 Good corrosion resistance
7 Big production capacity, delivery time within 3 ~ 15 days
8 Strong technical support, good after sale service

Grades
GRADEDENSITY
(g/cm3)
TRS
(N/mm2)
HARDNESS
(HRA)
Application recommended
YG1114.4260088.5Forming or stamping dies for metal powders and nonmetal powders.
YG1514.0280087.5For fabricating drawing dies of steel tubes and rods under High compressibility ratio; punching,stamping,forging tools under large stress.
YG2013.5320085.5For fabricating of stamping dies for watch parts, spring plates of musical instruments, battery jars, small sized steel balls, screws, screw caps.
YG16C13.9290085.5Impact resistance forging dies.
G18C13.7310084.5Impact resistance forging dies, hot-press forging dies and rollers.
YG20C13.5330083.5Dies for wear
resistant or impact resistant application.
YG22C13.3350083.0Nut forming dies and high impact resistance forging dies
YG25C13.1360082.5Stainless bolt header dies and rollers.
Other grades of tungsten carbide forging dies can be offered according to customers' requirement

Production process

Mixture(WC+CO+alcohol)→wet grinding→ drying→grinding again→suppression(Oil press,Automatic hydraulic press)→QC for blank→rubber extrusion→Wc+Co→sintering(HIP )→tungsten carbide blank→Fine grinding→QC→packing.    
Gw Carbide-Tungsten Carbide Wire Drawing Die Blanks and Complete Die.
Gw Carbide-Tungsten Carbide Wire Drawing Die Blanks and Complete Die.
Gw Carbide-Tungsten Carbide Wire Drawing Die Blanks and Complete Die.
Gw Carbide-Tungsten Carbide Wire Drawing Die Blanks and Complete Die.
Gw Carbide-Tungsten Carbide Wire Drawing Die Blanks and Complete Die.
Gw Carbide-Tungsten Carbide Wire Drawing Die Blanks and Complete Die.
Gw Carbide-Tungsten Carbide Wire Drawing Die Blanks and Complete Die.



Welcome for your inquiry!



 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours