Matrix Body PDC Drill Bit
1. SOFT TO MEDIUM AND HARD FORMATION DRILLING
Short parabolic profile with lower cutter density helps to obtain better ROP in soft to medium hard formations with lower compressive strength and small hard layers.
Parabolic profile with medium to lower cutter density helps to obtain better ROP in soft to medium formations with low compressive strength and small abrasive layers.
Medium Parabolic profile with medium cutter density helps to obtain better ROP in medium hard formation with medium compressive strength and small abrasive layers.
Parabolic profile with heavy cutter density helps to obtain better ROP and long life in hard dense formations with high compressive strength and small abrasive layers.
2. DURASET GAUGE
Super strong material promotes gauge wear resistance to provide long bit life.
3. SPECIAL CUTTER LAYOUT
Balanced force cutter layout combined with straight blade design to improve the bit stability.
Balanced force cutter layout combined with backside cutter design to improve the bit life and impact resistance.
4. HYDRAULICS
Cuttings removal and bit cooling for bits are optimized by matching the volume of rock removed by the cutter on each blade with the proportional fluid flow.
Big junk slot with balanced hydraulics design improves anti-balling ability within high penetration.
5. UNIQUE BACKRACK DESIGN
The cutter's back rake has been unique design, reducing the bit torque and increasing aggressiveness.
6. UNIQUE BLADE DESIGN
Curved blade design makes the bit work stability.
Straight blade mixed with curved blade make the bit work stably.
Size available: 6", 8-1/2", 9-1/2", 12-1/4", 16", 17-1/2"
Steel Body PDC Drill Bit
1. SOFT TO MEDIUM HARD FORMATION DRILLING
Medium short parabolic profile with medium cutter density helps to obtain better ROP in soft to medium hard formations with lower compressive strength and small hard layers.
2. DURASET GAUGE
Gauge cutter promotes gauge wear resistance to provide long bit life.
3. HYDRAULICS
Cuttings removal and bit cooling for bits are optimized by matching the volume of rock removed by the cutter on each blade with the proportional fluid flow.
4. UNIQUE BACKRACK DESIGN
The cutter's back rake has been unique design, reducing the bit torque and increasing aggressiveness.
Size available: 8-1/2", 12-1/4"
There are following typesof our PDC bits:
1. PDC Bit( Matrix Body)
2. PDC Matrix Body Core Bit
3. PDC Flat-top Concave Bit
4. PDC Steel Body Bit.
5. PDC Drag Bit
6. PDC Anchoring Bit
B. PDC Drag Bits
We Glorytek Industry manufacture and supply various of PDC Drag bits, like 3-wing,4-wing, 5-wing, 6-wing. And we can customize to meet your special requirements.
C. PDC Pillar-type Bit
D. PDC Concave Bit
1. SOFT TO MEDIUM AND HARD FORMATION DRILLING
Short parabolic profile with lower cutter density helps to obtain better ROP in soft to medium hard formations with lower compressive strength and small hard layers.
Parabolic profile with medium to lower cutter density helps to obtain better ROP in soft to medium formations with low compressive strength and small abrasive layers.
Medium Parabolic profile with medium cutter density helps to obtain better ROP in medium hard formation with medium compressive strength and small abrasive layers.
Parabolic profile with heavy cutter density helps to obtain better ROP and long life in hard dense formations with high compressive strength and small abrasive layers.
2. DURASET GAUGE
Super strong material promotes gauge wear resistance to provide long bit life.
3. SPECIAL CUTTER LAYOUT
Balanced force cutter layout combined with straight blade design to improve the bit stability.
Balanced force cutter layout combined with backside cutter design to improve the bit life and impact resistance.
4. HYDRAULICS
Cuttings removal and bit cooling for bits are optimized by matching the volume of rock removed by the cutter on each blade with the proportional fluid flow.
Big junk slot with balanced hydraulics design improves anti-balling ability within high penetration.
5. UNIQUE BACKRACK DESIGN
The cutter's back rake has been unique design, reducing the bit torque and increasing aggressiveness.
6. UNIQUE BLADE DESIGN
Curved blade design makes the bit work stability.
Straight blade mixed with curved blade make the bit work stably.
Size available: 6", 8-1/2", 9-1/2", 12-1/4", 16", 17-1/2"
Steel Body PDC Drill Bit
1. SOFT TO MEDIUM HARD FORMATION DRILLING
Medium short parabolic profile with medium cutter density helps to obtain better ROP in soft to medium hard formations with lower compressive strength and small hard layers.
2. DURASET GAUGE
Gauge cutter promotes gauge wear resistance to provide long bit life.
3. HYDRAULICS
Cuttings removal and bit cooling for bits are optimized by matching the volume of rock removed by the cutter on each blade with the proportional fluid flow.
4. UNIQUE BACKRACK DESIGN
The cutter's back rake has been unique design, reducing the bit torque and increasing aggressiveness.
Size available: 8-1/2", 12-1/4"
There are following typesof our PDC bits:
1. PDC Bit( Matrix Body)
2. PDC Matrix Body Core Bit
3. PDC Flat-top Concave Bit
4. PDC Steel Body Bit.
5. PDC Drag Bit
6. PDC Anchoring Bit
PDC Anchoring Bit | ||
| Bit Types | Application | |
| 2-wing half normal | Fit for f <8 rock formations | |
| 2-wing full | Normal | Fit for f <10 rock formations |
| Reinforced | Fit for f <15 rock formations | |
| 3-wing full | Normal | Fit for f <15 rock formations |
| Reinforced | Fit for f <18 rock formations | |
| PDC Anchoring Bit | |||||
| Type | Diameter(mm) | Height(mm) | Nozzle(pcs) | Nozzle Size( mm) | Thread(mm) |
| Normal Reinforced | 27 | 48 | 3 | 4 | M14x1.5 M12x2 M16x2 |
| 28 | 48 | 3 | 4 | ||
| 29 | 48 | 3 | 4 | ||
| 30 | 48 | 3 | 4 | ||
| 32 | 48 | 3 | 4 | ||
| 36 | 52 | 3 | 4 | ||
| 42 | 60 | 3 | 4 | ||
B. PDC Drag Bits
We Glorytek Industry manufacture and supply various of PDC Drag bits, like 3-wing,4-wing, 5-wing, 6-wing. And we can customize to meet your special requirements.
Types of PDC Drag Bit & Application | ||
| Type | Application | |
| PDC 4-wing Drag Bit | Normal | Fit for f <6 rock formations |
| Reinforced | Fit for f <8 rock formations | |
| PDC Multi-wing Drag Bit | Normal | Fit for f <6 rock formations |
| Reinforced | Fit for f <8 rock formations | |
| PDC Drag Bits Specification | ||||||
| Type | Size (mm) | Heigh (mm) | Wings (pcs) | PDC Cutter ( pcs) | Nozzle (pcs) | Nozzle Size (mm) |
| Normal Reinforced | 94 | 170 | 4 | 16 | 5 | 6 |
| 113 | 195 | 4 | 20 | 5 | 8 | |
| 133 | 220 | 6 | 30 | 5 | 8 | |
| 153 | 250 | 6 | 36 | 5 | 10 | |
C. PDC Pillar-type Bit
Types of PDC Pillar Bit & Application | ||
| Type | Application | |
| PDC Pillar-Type Bit | Normal | Fit for f <10 rock formations |
| Reinforced | Fit for f <12 rock formations | |
| PDC Pillar Bit Specifications | ||||
| Type | Diameter (mm) | Heigh (mm) | PDC Cutter ( pcs) | Flushing Holes |
| Normal Reinforced | 60 | 120 | 5 | 3 |
| 75 | 130 | 6 | 3 | |
| 94 | 130 | 8 | 4 | |
| 114 | 140 | 11 | 5 | |
| 133 | 150 | 14 | 6 | |
D. PDC Concave Bit
Types of PDC Concave Bit & Application | ||
| Type | Application | |
| PDC 3-wing Concave Bit | Normal | Fit for f <8 rock formations |
| Reinforced | Fit for f <10 rock formations | |
| PDC 4-wing Concave Bit | Normal | Fit for f <10 rock formations |
| Reinforced | Fit for f <12 rock formations | |
| PDC 4-wing Concave Bit | ||||||
| Type | Diameter (mm) | Heigh (mm) | Break Post (pcs) | PDC Cutter ( pcs) | Nozzle (pcs) | Nozzle Size (mm) |
| Normal Reinforced | 75 | 120 | 2 | 8 | 6 | 8~10 |
| 94 | 125 | 2 | 8 | 6 | 8~12 | |
| 113 | 130 | 2 | 12 | 6 | 10~12 | |
| 133 | 140 | 3 | 12 | 6 | 10~12 | |